A few months back, I decided that I wanted to upgrade my EDC off-duty carry pistol. At the time, I had a Smith and Wesson Bodyguard. And while it was a decent, quality firearm, I did not like the LONG trigger pull. So I decided I wanted to make a change. Off to my favorite gun store I went.
After looking at a few, I picked up the Sig Sauer P238, and immediately fell in love. The P238 is a metal framed 1911 in miniature, (minus the grip safety), chambered in .380. It fit perfectly into my hand (with the flared 7 round mag…see picture) with an overall width of about 1’1” with a 2.7’’ barrel. As for weight, it is about 15 oz. unloaded.
The pistol comes with a 6 round magazine, but I purchased an additional 7 rounder with a flared bottom plate. (I would recommend this mag to anyone buying this firearm.)
I went to a local gun range, where I was able to rent the P238. The guy behind the counter lent me a 7 round, flared mag. From the very first trigger pull, I knew this gun was for me. The trigger was fluid and so SMOOTH, at maybe 5 lb pull.
The P238 is single action, meaning that the hammer must be cocked in the rear position. The safety is a bit strong, but that means it won’t accidentally be flipped off. There is a noticeable “click” when engaging the safety on and off. You will also notice the feel when doing so. Hence there won’t be any confusion when flipping the safety on and off. You WILL hear it and feel it!
I practiced quite a bit, drawing from a holstered position while disengaging the safety. The safety flips off easily, though flipping the safety back on takes a bit of practice as it was a little stiff at first.
Speaking of holsters, the P238 does come with a Sig hard case OWB concealment holster. I thought it was a nice touch, but ended up not using it. It rode a bit high on my waist for my liking. I also felt like I wanted a concealment holster that was a bit more secure and stable.
As the popularity of the AR platform increases, so have the number of manufacturers. For those who are new to prepping or firearms, trying to find a decent quality AR on a budget can be tricky. And to those people, Smith and Wesson introduced the M&P 15 Sport model rifle.
The first things to note on this rifle is that it lacks a dust cover or a forward assist. (The dust cover is the metal plate covering your rifle’s ejection port when the rifle is not in use. See the picture below.) Smith and Wesson, in an effort to make the rifle more affordable, left these items off of the Sport model.
For the AR enthusiast, this might immediately turn them off from this gun. But realistically, unless you plan on crawling around on your belly, the dust cover really isn’t essential. As long as you store your rifle in a cool, dry place and keep it clean, you should be fine without one.
As for the forward assist, I put anywhere from 700-900 rounds through this rifle without a single hiccup. Never once did I have a “failure to feed” or a “failure to extract” problem with the Sport model.
There are mixed emotions about the need of the forward assist. Personally, I like having one, but to be honest I have never used it. Considering that I owned the Sport model and put well over 700 rounds through it without a problem, I’d say not having a forward assist was a “non-issue.”
About a month ago, one of my best friends at work hit me up about purchasing his backup weapon, the Sccy CPX-2 , which is a 9mm. I normally would not have a need for this pistol, and would not have purchased it on my own. I already have a backup/off duty gun that I really enjoy. And I do not have any firearms in 9mm. (For pistol I stock .40 cal, .380, and some .357.)
But I knew he needed the money, and he was offering me a VERY fair price. So I purchased it from him thinking I would keep it until he wanted to buy it back. When I mentioned that to him a few days later, he replied that when he did eventually buy a new backup gun, he would go with something different.
So I am now the proud, permanent owner of a Sccy CPX-2.
At this point, I started thinking that maybe I could trade it in for something else. I could at least get out of it what I had in it.
I also wondered if it wouldn’t make a decent weapon for someone in my group. We don’t have any 9mm ammo, but what if we came across some if things went really bad? 100 rounds of 9mm ammo isn’t that expensive, and it might be a pistol I could give to a family member if “things go south”.
Either way, I decided to do a review on this pistol for folks who might want an EDC pistol without breaking the bank. The MSRP on the gun is $319, which means from a reputable dealer you could probably find it for around $250-$270. A used one might be even cheaper.
I have mentioned a few times in previous articles about owning a Frog Togg rain suit. Lately, I have received several emails asking me about Frog Togg. Are they really that good? They are only $20 or so? Are they light weight? Questions like that. So I thought I would do a review on the suit and tell you why I think it is the perfect prepper rain gear!
Now before I jump into it, let me state, for the record, I am NOT a Frog Togg salesman. I have not had any sort of communication with Frog Togg, and they are not in any way compensating me for this article. I am writing about this suit because I believe in it and I use it.
The picture to the left is my brother, Mike, wearing his Frog Togg suit. He presently works for a company that repairs and paints roller coasters. That picture was taken on a cold and wet Chicago morning in March. In about 25 degree weather, he was power washing the roller coaster. (I would never power wash anything in 25 degree weather, but then again I’m not half crazy!)
Mike said that with the industrial strength power washer, water was “going everywhere”. Everything was soaked and freezing within minutes. But the Frog Togg suit kept his inner layers completely dry, which kept him warm and dry. And as any good prepper knows, getting wet in cold weather can lead to hypothermia. (Hypothermia is the number one killer of outdoor recreationalists!) If you are wet and do not take precautions, you can perish in temps as high as 50 degrees!
Some might call me a “Gun Nut”. I prefer the term “Firearm Aficionado!” But I thought I would combine my love of firearms with my love of writing and blogging. So to begin this endeavor, I decided I would start with a review of my old backup, off-duty, EDC pistol; the .380 Bodyguard by Smith and Wesson.
I purchased the Bodyguard wanting a backup pistol for my Glock 23 as well as something I could easily carry off-duty. I looked for something light weight and easily concealable. The S&W Bodyguard fit that bill. The fact that it had a built in laser sight by Insight was a bonus.
The laser is activated with a button on both sides of the gun frame. You hit the button for on, again for pulse, and a third time for off.
The Bodyguard is a hammer fired, double action semi-automatic pistol. The slide is stainless steel and coated in Melonite, while the lower frame is polymer. It came with a single, 6 round magazine with a flared bottom plate for better gripping ability. (Gun has a 6 +1 capacity.)
The barrel on this gun is 2.75 inches, with the total length of the gun at 5.4’ and weighs about 12 oz.